Thursday, June 25, 2015

Growth tips for Entrepreneur/Businesses.

Growth tips for Entrepreneur/Businesses

Hi,
When your business enters a growth phase, you may feel
elated at the prospect, but the inherent challenges can
become overwhelming.
‘’What’s the best way to do this?" and "What should I focus
on?" are common questions we hear from entrepreneurs
experiencing growth.
The solution? Put a plan in place and stick to it. You’ll avoid
wasting time and money going down the wrong avenue,
focusing instead on your most efficient activities.
I wish you success in your positive endeavours,

Ojames.

Thursday, June 11, 2015

Tips for choosing safety footwear

Today’s work boots offer safety features that weren’t considered decades ago and better protect against the most common injuries, including those experienced in the railway industry, from falling or rolling objects to electrical hazards.

Specifically, I recommend any worker who spends time in an environment where these risks are high to look for boots that are able to claim meeting or exceeding the Canadian Standards Association’s certification – tough standards that protect against the hardest working conditions.

Metatarsal protection

Metatarsal injuries are painful and can require a long recovery process. Steel toe boots don’t provide protection to the metatarsals, so I recommend choosing a boot that addresses this area of the foot. Some CSA- approved boots incorporate the protection of a shield-like feature that overlays the composite toe and runs to the top of the instep. This provides protection that absorbs impact so your feet don’t.

Composite safety toe

Although most boots with a composite safety toe provide security, only select brands meet or exceed ASTM F2413- 11 standards for impact, compression and electrical hazards. Coming in at a fraction of the weight, certain work boot options provide protection without weighing the wearer down.

Electrical hazard compliance

There’s always the chance of exposure to electrical currents in railway work, so look for boots that meet the CSA 2011 standards by providing protection from open electrical currents up to 18,000 volts.

Outsole offerings

Although many new safety features focus on the construction of the inner work boot, the outsole shouldn’t be ignored. A good outsole can provide excellent resistance to heat, chemicals, oil, gas, chips, marking and slipping. When faced with extreme temperatures or unsafe, slippery surfaces, a sturdy outsole that offers gripping features can be a lifesaver.

In addition to offering protection in the workplace, I recommend considering technologically advanced products that provide comfort and convenience for long, grueling workdays, which can include:



Flexible, cushioned insoles for ultimate comfort

Dual-density memory foam for stabilization, while still allowing freedom of movement

Waterproof construction that ensures feet stay dry no matter the weather conditions

Lastly, a proper-fitting boot can benefit you as much as some of these protective features. Take these three things into consideration when shopping for a new pair:

Instep

The instep should fit snug, but not tight. If the instep is too loose, you’ll experience excessive slipping in the heel. If it’s too tight, it could cause heel and toe pain. Consider various widths as an option for the perfect-fitting instep.

Ball

The ball of your foot should rest on the ball of the boot. If it’s too short, the ball of your foot will sit too far forward and force the toes into the toe box, causing pain.

Heel

You might experience slight slippage in the heel with a new pair of boots. However, as you break them in, the sole will flex and, with time, you’ll notice most of the slippage will disappear.

Thursday, May 14, 2015

opportunity for special people

Do you know any ORPHAN
(Who lost both parents) who has completed secondary school and desires to study in the university?
Tell them to apply for a SCHOLARSHIP At Www.samamagafoundation.org/apply
Deadline: May 29, 2015.
For More inquiries call: 08034622690, 08174364192, 09036804381.

Thursday, May 7, 2015

OJAMES FOOTWEARS: Footwear – Tips on Proper Fitting, Care, and Usage...

OJAMES FOOTWEARS: Footwear – Tips on Proper Fitting, Care, and Usage...: Most people would agree that, like having a good mattress, good shoes are important to one’s well being, since many hours are spent bearin...

Footwear – Tips on Proper Fitting, Care, and Usage

Most people would agree that, like having a good mattress, good shoes are important to one’s well being, since many hours are spent bearing weight on them. Yet people frequently buy ill-fitted shoes for fashion, price, or other reasons, and then keep wearing the shoes till they are worn out, because they have just become “broken in.”
Foot pain can be prevented or reduced from buying properly fitted shoes and proper footwear usage. Following are tips when purchasing shoes, aimed more for those buying running or exercise shoes, but also practical for the general population too. Also, tips on proper shoe care and use are presented.

Tips for purchasing shoes

Shoe fitting

  • Try on shoes in the afternoon or end of the day, or after a run or workout, since feet tend to become larger as the day progresses, by as much as a full size by the end of the day.
  • Wear running socks when buying a new pair of running or exercise shoes.
  • Always relace shoes being tried on.
  • Stand when determining proper shoe fit.
  • There should be approximately ½ inch of space between the end of your longest toe and the end of the toe box, or roughly your thumb width sideways.
  • One should be able to wiggle one’s toes upwards.
  • One should be able to squeeze a ripple in the shoe between the 1st and 5th toes, signifying adequate space in the toe box.
  • Twist the shoe along its length to check for excessive flexibility.
  • Squeeze the heel counter to check for firmness. It should be firm and difficult to pinch since it stabilizes and prevents slippage at the heel.
  • Bend the front part of the shoe upwards. It should bend in the area of the toebox. If the shoe bends in the area of the laces or midfoot, it is excessively flexible.
  • For running shoes, a padded collar around the top with a cut out for the Achilles tendon allows one to lace the shoe tightly.
  • Since one shoe may fit differently than the other, try them both on. Buy the size based on the larger foot.
  • When lacing up the shoe, the width of the lace holes should be the same all the way to the top. If not, it may be not the correct size.
  • One should know the type of foot one has when purchasing shoes, whether one has flat feet, high arches, or neutral feet. For example, a flat-footed person needs a motion control shoe, which is a stiffer, less flexible shoe to help decrease the excess motion inward seen with this type of foot. On the other hand someone with high arches needs a well-cushioned shoe to improve shock absorption since this person has a more rigid, less forgiving foot. For a more in-depth look at footwear based foot types, please refer to McKinley Health Center’s handout “Foot Types and Proper Footwear.”

Other considerations

  • Laced on shoes give a better fit than slip-ons.
  • Running shoes should be comfortable from Day 1. They shouldn’t have to be “broken in.”
  • If one participates in an exercise or sports specific activity, then a sport specific shoe is preferred.
  • With age the feet get fatter and longer, the feet and ankles become stiffer, and the arches tend to flatten.

Shoe use and care

  • Running shoes should be retired after 400-600 miles since the midsole begins to break down.
  • For those who walk as exercise, shoes should be replaced roughly every 6 months. For normal use, sneakers should be replaced every year.
  • Midsoles have a memory of 24-36 hours, so if one is running every day, the midsoles may not have time to spring back completely by the next run. Therefore, it is better to wear a different pair of shoes on alternate days.
  • New shoes will break down over time, generally a year or two, if they are not worn.
  • Machine washing and drying are very hard on shoes. If necessary, clean with dishwashing liquid, and then let the shoes air dry.
  • Don’t use your other foot against a shoe’s heel counter to take off your shoe.
  • Try not to run in wet shoes, since the cushioning may be compromised.

References

“What Every Runner Should Know about Shoes,” Physician & Sportsmedicine; Jan, 2005; Vol. 33 Issue 1, p23
American Orthopaedic Foot and Ankle Society Web site at: www.aofas.org
American Podiatric Medical Association Web site at: www.apma.org

Thursday, March 26, 2015

bones in human foot

here are 26 bones in the human foot (28 if you include the sesamoid bones at the base of the big toe). These are: the Talus, which connects to the tibia at the ankle; the Calcaneus, which forms the heel; the Navicular, Cuboid, and three Cuneiforms (Medial, Intermediate, and Lateral), which form the middle of the foot; the five Metatarsals, which radiate out to the toes; and 14 Phalanges